Small-Polyp Stony Corals — The Reef Builders With the Tiniest Polyps and the Biggest Demands
Small-polyp stony (SPS) corals are hard corals (order Scleractinia) whose individual polyps are tiny — usually a few millimetres or less — set into a dense calcium carbonate skeleton. The term is a reef-keeping label, not a scientific group: it contrasts with large-polyp stony (LPS) corals such as brain and hammer corals. SPS genera include Acropora, Montipora, Pocillopora, Porites, Stylophora and Seriatopora. On wild reefs, they are among the most important builders of reef structure.
This hub links every small-polyp stony coral profile on TheSea.Org and explains what the group is, how its corals live, why they matter on wild reefs and what it takes to keep them in an aquarium. Each genus page covers identification, biology, conservation status and care in more detail, and the cards at the bottom of the page list them all.
SPS vs LPS: what is the difference?
Polyp size, mostly, with consequences for feeding, growth and care.
| Feature | SPS corals | LPS corals |
|---|---|---|
| Polyp size | Tiny (mm) | Large, fleshy (cm) |
| Skeleton | Dense, often branching or plating | Massive, with fleshy tissue over it |
| Main energy source | Zooxanthellae; light-hungry | Zooxanthellae plus more prey capture |
| Growth | Often fast (branching types) | Usually slower |
| Water stability needed | Very high | Moderate |
| Examples | Acropora, Montipora, Porites | Euphyllia, brain corals, Blastomussa |
“SPS” and “LPS” are terms coined by reef aquarists, not taxonomists. Scientists classify stony corals in the order Scleractinia by skeleton structure and, increasingly, by DNA, and those studies have reshuffled many traditional families. The hobby labels group corals instead by how they look and how they are kept. SPS corals have tiny polyps, usually a few millimetres across or less, set into a dense, often porous skeleton, so a colony looks like bare stone covered in fine fuzz when the polyps are extended. LPS corals have large, fleshy polyps that may be several centimetres wide and cover much of the skeleton. The divide is practical rather than biological: some genera, such as Hydnophora and Turbinaria, sit between the two and are kept by both camps. See types of coral polyps for the full picture.

How do small-polyp corals live?
Each coral colony is made of hundreds to many thousands of genetically identical polyps, connected by a thin sheet of living tissue that covers the skeleton. Every polyp is a tiny sac with a ring of tentacles around a mouth, and beneath it the tissue lays down calcium carbonate in the form of aragonite, building a cup called a corallite. In SPS corals the corallites are small and often packed closely together, which is why the surface of an Acropora branch or a Porites boulder looks finely pitted.
Most of the energy comes from light. Living inside the coral’s tissue are single-celled algae, commonly called zooxanthellae, that photosynthesise and pass sugars and other products to their host. In return the coral gives the algae shelter, carbon dioxide and nutrients. Small polyps have little capacity to catch large prey, so many SPS corals rely heavily on this partnership, although they also capture plankton, absorb dissolved nutrients and trap fine particles in mucus. This reliance on light is why SPS corals dominate shallow, clear, sunlit reef zones, and why aquarists who keep them invest in powerful lighting.
Reproduction takes two forms. Many SPS corals are broadcast spawners: on a few nights a year, timed by water temperature, the lunar cycle and day length, colonies release bundles of eggs and sperm into the water, where fertilisation takes place. On the Great Barrier Reef the main mass spawning usually occurs in the late spring and early summer, a few nights after a full moon. Others, including some Pocillopora and Stylophora, brood larvae inside the polyps and release them ready to settle. Branching species also reproduce very effectively by fragmentation: when a storm snaps off a branch, it can reattach and grow into a new colony, which is exactly the process reef restoration projects and coral farmers exploit.
How to tell the main SPS genera apart
Identifying SPS corals to species is notoriously difficult, even for specialists, because growth form changes with light and water movement and many species look alike. Telling the main genera apart is easier with a few clues. Acropora branches end in a distinct, slightly larger axial corallite at the tip, surrounded by smaller radial corallites that often stick out like tiny tubes. Montipora has no axial corallites; its corallites are among the smallest of any coral and are sunk into a rough surface that may be covered in tiny bumps or ridges. Pocillopora is covered in rounded verrucae, while Seriatopora has neat rows of corallites along thin, needle-tipped branches. Porites has very small, shallow corallites packed tightly over a smooth-looking surface, and its polyps, when extended, give the colony a soft, furry appearance. Getting a close look at the branch tips and the spaces between corallites is usually the quickest way to narrow down a colony.
Which SPS genera are on TheSea.Org?
Twelve profiles, from the reef-building giants to niche aquarium favourites.
- Acropora Staghorn, elkhorn and table corals; ~150 species
- Montipora Plating, encrusting, branching; ~85 species
- Porites Finger corals and centuries-old boulders; dozens of species
- Pocillopora Cauliflower corals with verrucae
- Stylophora Hood coral, a research model
- Seriatopora Birdsnest corals
- Pavona Cactus and leaf corals
- Hydnophora Horn corals with cone-shaped hydnophores
- Merulina Radiating plates
- Turbinaria & scroll coral Cup, scroll and pagoda corals
Acropora is the largest genus of reef-building corals, with roughly 150 described species, and the one most associated with the word “SPS”. It includes branching staghorn corals, broad elkhorn corals, flat tables and bushy corymbose forms. Each branch tip carries a larger axial polyp that drives rapid growth: in Florida, staghorn coral branches typically grow about 10–20 cm a year. That speed makes Acropora dominant on many healthy reefs but also vulnerable, because fast-growing, thin-tissued corals are often first to bleach in a heatwave.
Montipora, with about 85 known species, is the second most species-rich coral genus. Its forms include plates, encrusting sheets and branching colonies, and it is easily recognised by its tiny polyps set in a rough, often decorated surface between the corallites. Plating Montipora are among the most popular first SPS corals in aquariums because they grow quickly and tolerate a range of lighting.
Porites builds everything from slender finger corals to massive boulders several metres across. Massive Porites grow slowly, about a centimetre a year, but steadily for centuries; one study found colonies about 700 years old on a single reef. Their skeletons contain annual density bands like tree rings, and the chemistry of each band records past sea temperatures, making them one of the main climate archives of the tropical ocean.
Pocillopora, the cauliflower and brush corals, are recognised by the small bumps called verrucae that cover their branches. They are widespread in the Indo-Pacific and eastern Pacific, often among the first corals to recolonise disturbed reefs. Stylophora, the hood coral, especially Stylophora pistillata, is one of the most-studied corals in laboratory research on calcification and symbiosis. Seriatopora, the birdsnest corals, form dense tangles of thin, pointed branches that shelter small fish and crabs.
Pavona includes cactus and leaf corals with ridged, leafy plates; Hydnophora, the horn corals, carry cone-shaped mounds called hydnophores between their polyps; Merulina grows as radiating plates with ridges running toward the edges; and Turbinaria forms cups, scrolls and pagoda-like tiers. These genera are less dominant on most reefs but add much of the variety that makes coral communities so complex.
Where do SPS corals grow?
Small-polyp stony corals occur on tropical reefs worldwide, but their diversity is very uneven. The richest region is the Coral Triangle of Indonesia, the Philippines, Malaysia, Papua New Guinea, Timor-Leste and the Solomon Islands, where a single reef can hold dozens of Acropora species alongside many Montipora and Porites. Diversity falls away towards the central Pacific and is far lower in the Atlantic. The Caribbean has only two Acropora species, elkhorn and staghorn, plus their natural hybrid, the fused-staghorn coral, which is one reason their decline there has been so damaging.
Within a reef, SPS corals sort themselves by light and wave energy. Robust branching and plating forms dominate the shallow reef crest and upper slope, where light is strongest and water movement highest. Table corals spread across the upper slope, and delicate branching species prefer sheltered lagoons and back-reef areas where waves will not snap them. Massive Porites can be found from the reef flat, where they may form flat-topped microatolls exposed at low tide, down the slope. Below a few tens of metres, as light fades, SPS corals generally give way to plating forms and to other groups that cope better with dim conditions.
What eats and damages SPS corals?
Several predators specialise on small-polyp corals. The crown-of-thorns starfish prefers fast-growing Acropora and other branching and plating corals, and its periodic population outbreaks have killed large areas of coral on the Great Barrier Reef and elsewhere in the Indo-Pacific. Drupella snails graze the tissue of branching corals, and parrotfish and some butterflyfish bite or pick at living colonies. Diseases add to the toll: white-band disease devastated Caribbean acroporids, and a range of tissue-loss diseases affect corals worldwide, especially when water is warm and stressed colonies are weakened.
Physical damage matters too. Branching SPS corals break easily, and storms, anchors, careless divers and snorkellers can snap branches that took years to grow. On the positive side, broken fragments can survive and reattach if they come to rest in a stable spot, which is how many thickets naturally spread. Divers can help by keeping fins, hands and equipment well clear of the reef, especially over shallow branching corals where a single kick can break off several years of growth.
Why do SPS corals matter on wild reefs?
They lay down much of the limestone that becomes the reef itself.
Branching Acropora and Pocillopora build three-dimensional thickets that shelter fish and invertebrates; plating Montipora and table Acropora shade the reef below them; massive Porites form boulders that last for centuries. In the Caribbean, elkhorn and staghorn corals once formed the main framework of shallow reefs, and the reef crest zones they built help break waves and protect coastlines. Because branching corals grow quickly, they also allow reefs to recover relatively fast after storms, provided the water stays clean and cool.
The same features make them fragile. Many SPS corals are highly sensitive to heat, and during mass bleaching events they often lose their algae and die first, while massive and encrusting forms survive. In the Caribbean, elkhorn and staghorn corals declined dramatically from the late 1970s and 1980s, largely because of white-band disease, together with hurricanes, bleaching and pollution. In 2006 both were listed as threatened under the US Endangered Species Act. In 2014 the US added 20 more coral species as threatened, 15 of them from the Indo-Pacific, including eight species of Acropora and species of Montipora, Porites, Pavona and Seriatopora. All stony corals are listed on CITES Appendix II, which means international trade requires permits. See coral reef bleaching and how coral is formed.
The fast growth and easy fragmentation of branching SPS corals are now being used to help reefs recover. Restoration groups in Florida and the Caribbean grow staghorn coral fragments on underwater “trees” and lines in nurseries, then outplant them onto degraded reefs, and similar methods are used with Acropora in the Indo-Pacific. These projects cannot replace action on warming and water quality, but they buy time for the species most at risk.
How do you keep SPS corals in a reef tank?
Strong light, strong flow and, above all, stability.
Most SPS losses trace back to sudden swings, especially in alkalinity and temperature. SPS corals build skeleton quickly, so they consume calcium, carbonate (measured as alkalinity) and magnesium faster than most other corals, and a densely stocked tank can drain these within days. Keepers typically run a mature system with good filtration, automatic top-off for evaporation and regular testing, with calcium and alkalinity replaced by dosing pumps, a calcium reactor or a kalkwasser system. Typical targets:
| Parameter | Typical SPS target |
|---|---|
| Calcium | 420–450 ppm |
| Alkalinity | 8–9 dKH (keep stable) |
| Magnesium | 1,250–1,350 ppm |
| Nitrate | ~1–10 ppm (not zero) |
| Phosphate | ~0.03–0.07 ppm |
| Temperature | 24.5–26°C (76–79°F) |
| Salinity | 1.025–1.026 SG (35–36 ppt) |
Light should be strong but introduced gradually: a coral moved from a dim shop tank to a bright reef can bleach within days. Flow should be strong and variable, to bring food and oxygen to the polyps and carry away waste. Nutrients deserve attention in both directions. Very high nitrate and phosphate encourage algae and can brown corals, but driving them to zero, as was once fashionable, often leads to pale, starving colonies, which is why many keepers now aim for small, measurable amounts.
New corals should be inspected and dipped before they go into a display tank. Acropora-eating flatworms, red bugs and the small nudibranchs that feed on Montipora can spread through a system and are much easier to stop at the door than to eradicate later. Most SPS corals in the trade today are aquacultured frags grown in captivity, which reduces pressure on wild reefs and usually produces corals already adapted to aquarium conditions. Beginners are often advised to start with forgiving genera such as Montipora, Pocillopora, Stylophora or Pavona before moving to more demanding Acropora. See SPS reef tank, reef tank calcium level, reef tank alkalinity and magnesium in a reef tank for detailed guides.
What does SPS stand for?
Small-polyp stony, a reef-keeping term for hard corals with tiny polyps.
What are examples of SPS corals?
Acropora, Montipora, Pocillopora, Porites, Stylophora and Seriatopora.
What is the difference between SPS and LPS corals?
SPS corals have tiny polyps and need more light and stability; LPS corals have large fleshy polyps.
Are SPS corals hard to keep?
They are the most demanding corals, mainly because they need very stable water.
What is the easiest SPS coral?
Montipora, Pocillopora, Stylophora and Pavona are often recommended first SPS corals.
What parameters do SPS corals need?
Roughly calcium 420–450 ppm, alkalinity 8–9 dKH and magnesium 1,250–1,350 ppm, kept stable.
Do SPS corals need feeding?
Mostly they rely on light, but fine foods and some nutrients (non-zero nitrate and phosphate) help.
Why are SPS corals important?
They build much of the reef framework and are sensitive indicators of reef health.
- World Register of Marine Species (WoRMS). Accepted species lists for scleractinian genera.
- NOAA Fisheries (2014). Final ESA listing determinations for 20 reef-building corals.
- NOAA National Marine Sanctuary of American Samoa. Big corals (Porites).
- Reef-keeping consensus ranges for SPS systems (calcium, alkalinity, magnesium, nutrients, temperature, salinity).
Blane Perun has been exploring Earth’s oceans and marine life for over 25 years. Founder of TheSea.Org in 1999, underwater photographer, coral aquaculture pioneer, and explorer of 80+ countries.
About Blane Perun →