---
title: "Turbinaria Coral: Cup, Scroll & Pagoda Corals Explained"
url: https://thesea.org/turbinaria/
date: 2016-01-19
modified: 2026-11-14
lang: en
author: "Blane Perun"
description: "Turbinaria is a genus of about 17 stony corals in the family Dendrophylliidae, known as cup, scroll, vase, disc and pagoda corals for their plate-like, often spiralling growth. Most open their polyps at night."
categories:
  - "Small-Polyp Stony"
image: https://thesea.org/wp-content/uploads/turbinaria-coral-thesea-org-blane-perun-1024x572.webp
word_count: 3068
---

# Turbinaria Coral: Cup, Scroll & Pagoda Corals Explained

[TheSea.Org](/)▸[Small-Polyp Stony Corals](/small-polyp-stony-corals/)▸Turbinaria

# Turbinaria — Cups, Scrolls and Pagodas Built From Spiralling Plates

SPS Corals
By [Blane Perun](/about-blane-perun/)
November 7, 2026
14 min read

What is Turbinaria?
***Turbinaria*** is a genus of colonial stony corals in the family **Dendrophylliidae** — the same family as the colourful, non-photosynthetic sun corals. The World Register of Marine Species accepts **13 living species** after the former *T. peltata* was moved to *Duncanopsammia*. Common names include **disc, scroll, cup, vase, pagoda** and **ruffled ridge coral**, reflecting their plate-like, often tiered or spiralling shapes. They are found across the Indo-Pacific from the Red Sea to Japan and the south-central Pacific, often on turbid inshore reefs. For the most popular species, see [scroll coral (*T. reniformis*)](/scroll-coral/).

Quick facts — Turbinaria

FamilyDendrophylliidae
Species**13** accepted (WoRMS)
Common namesCup, scroll, vase, disc, pagoda coral
FormsFoliaceous (most common), laminar, columnar, massive
CorallitesUsually on one surface only
PolypsMostly night-active
RangeRed Sea to Japan and S. central Pacific

*Turbinaria* is a genus of plate-forming stony corals known as cup, scroll, vase and pagoda corals. Its colonies grow as thick plates, cups or spiralling tiers with small polyps, usually on one face only, and they are among the most sediment-tolerant reef builders in the Indo-Pacific. The World Register of Marine Species currently accepts 13 living species, after the best-known daytime-feeding species, the former *Turbinaria peltata*, was moved to the genus *Duncanopsammia*.

To a diver, a big *Turbinaria* is one of the most architectural sights on a turbid inshore reef: a stack of greenish-yellow or brown plates, sometimes more than a metre across, built up like the eaves of a pagoda. To a reef keeper, it is one of the hardiest stony corals available, a slow but steady grower that tolerates modest light and turbid water. This page covers how to recognise the genus, how its species differ, where it lives, how it feeds, reproduces and copes with sediment and heat, its conservation status, and what it needs in an aquarium.

13Accepted species (WoRMS)
~2 mmTypical corallite size
1815Genus named by Oken

What kind of coral is Turbinaria?
*Turbinaria* is a scleractinian, or stony coral, in the family Dendrophylliidae. The German naturalist Lorenz Oken named the genus in 1815, and several later names, such as *Explanaria* and *Gemmipora*, have since been absorbed into it. It should not be confused with *Turbinaria* the brown seaweed, a completely unrelated genus of algae in the family Sargassaceae that shares the name and also grows on tropical reefs.

Its family is an unusual one. Most dendrophylliids, including the orange sun corals (*Tubastraea*) and many solitary cup corals of deep or shaded water, have no symbiotic algae and live entirely by catching plankton. *Turbinaria* is one of only three dendrophylliid genera that host zooxanthellae, the symbiotic dinoflagellates that power most shallow reef corals; the others are *Duncanopsammia* and *Heteropsammia*. That partnership is why *Turbinaria* is hermatypic, a true reef builder, while most of its relatives are not.

Molecular studies of the family in the 2010s, including a 2014 phylogeny of 30 dendrophylliid species by Roberto Arrigoni and colleagues, showed that several groups defined by skeleton shape were not natural lineages. One consequence is that the disc coral formerly called *Turbinaria peltata*, the species famous for extending its polyps by day, is now listed by WoRMS as *Duncanopsammia peltata*, a close relative of the aquarium Duncan coral. Older references, including many aquarium guides, still treat it as a *Turbinaria* and still describe the genus as having “about 17” species. The current count of accepted living species is 13: *T. bifrons*, *T. conica*, *T. conspicua*, *T. crater*, *T. cylindrica*, *T. frondens*, *T. heronensis*, *T. irregularis*, *T. mesenterina*, *T. patula*, *T. radicalis*, *T. reniformis* and *T. stellulata*.

![turbinaria coral: Turbinaria Coral: Cup, Scroll & Pagoda Corals Explained](https://thesea.org/wp-content/uploads/turbinaria-thesea-org-by-blane-perun.webp)turbinaria coral
How do you recognise Turbinaria?
At genus level, *Turbinaria* is one of the easier stony corals to recognise. Colonies may be massive, encrusting, columnar or laminar, but the commonest form is foliaceous: thin to thick plates that may be flat, cupped, vase-shaped, contorted or arranged in overlapping tiers. The corallites, the skeletal cups that hold the polyps, are usually found on only one surface of each plate, typically the upper side. They are small, often around 2 mm across in species such as *T. reniformis*, *T. mesenterina* and *T. stellulata*, and can be either immersed in the skeleton or raised on short cones or tubes.

The skeleton between the corallites, the coenosteum, is dense and heavy, which is why a *Turbinaria* plate feels surprisingly weighty for its size. The corallite walls are porous, the internal septa are short and neatly arranged, and the central columella is broad. Living colonies are typically yellow, yellowish-green, grey-green, cream or brown. Polyps of most species expand mainly at night, so by day a colony often looks smooth and dotted with small cups; at night it becomes fuzzy with tiny tentacles.

The chief look-alikes are other plating corals. *Montipora* plates have much smaller corallites, under 1 mm, and a textured surface between them. *Pavona* and *Leptoseris* plates have corallites joined by radiating ridges rather than isolated cups. *Merulina* has ridged, branching valleys. A thick plate with neatly spaced, round, isolated cups on one face is usually a *Turbinaria*.

Which Turbinaria species are best known?
**Yellow scroll coral (*T. reniformis*).** The species most often seen in aquariums. It forms horizontal plates or shallow chalices, sometimes tiered, with widely separated corallites 1.5–2 mm across on the upper surface only and a distinct rim free of corallites. It is usually yellowish-green. It ranges very widely, from the Red Sea and Gulf of Aden across the Indian Ocean to the western Pacific. See the separate [scroll coral](/scroll-coral/) profile for more detail.

***T. mesenterina*.** A highly variable species that may encrust or form flat or vase-shaped plates with conical corallites about 2 mm wide. On upper reef slopes it builds upright or tiered plates, and in deeper water the plates become horizontal. In the Arabian region it is very common on sand and other sediments, forming groups of vertical, interlocking plates in greenish-yellow, greenish-grey or greyish-brown. It is the species most studied for sediment tolerance.

***T. frondens*.** Starts as a cup and develops lobes and fronds, upright or horizontal and often irregularly contorted; colonies can also be massive, encrusting or columnar. It is a common species across a wide range.

***T. stellulata*.** Unlike the plate-formers, this species is submassive with encrusting edges and rarely builds vertical structures. Its corallites are about 2 mm wide with thick walls.

**The rarer species.** *T. bifrons* grows vertical, two-sided fronds; *T. patula* has upright fronds with larger, elliptical corallite openings around 5 mm wide; *T. radicalis* encrusts rock or sends rootlets into the substrate; *T. heronensis*, described by John Wells and named after Heron Island on the Great Barrier Reef, forms colonies up to about 50 cm across with long, tubular corallites; and *T. conspicua* has small, two-sided fronds with immersed corallites. Several of these are uncommon throughout their ranges and are difficult to identify without examining the skeleton.

Where does Turbinaria live?
The genus is found across the tropical and subtropical Indo-Pacific, from the Red Sea and the Indian Ocean through South-East Asia to Japan and the south-central Pacific, including the Great Barrier Reef and both coasts of Australia. It reaches well into subtropical waters. It is a prominent member of the coral communities on the high-latitude reefs of eastern Australia, south of the Great Barrier Reef, where long-term studies have tracked it alongside *Acropora* and *Pocillopora*.

The genus is most at home in shallow, turbid water. Species such as *T. mesenterina* are typically found at about 3–20 m on inshore reefs, rocky foreshores and soft bottoms where river runoff and resuspended sediment make the water cloudy. Palaeoecological cores drilled through turbid nearshore reefs on the central Great Barrier Reef show that *Turbinaria*, along with *Acropora* and *Montipora*, has been one of the main reef builders there for centuries to millennia. A few species buck the trend: some, like the dome-forming *T. heronensis*, seem to favour clearer water on upper reef slopes.

How does Turbinaria cope with mud and low light?
The answer lies in a flexible diet. Like other zooxanthellate corals, *Turbinaria* gets much of its energy from the sugars its symbiotic algae produce by photosynthesis. But in turbid water, light falls off quickly with depth and with every pulse of sediment. Kenneth Anthony and Katharina Fabricius tested how corals respond in a classic 2000 experiment, raising *T. mesenterina* and the massive coral *Goniastrea retiformis* across a range of turbidity. They found that *T. mesenterina* compensated for the loss of light by feeding more on suspended particles, so that its energy budget held up even in murky water. In effect, the sediment that shades the coral also feeds it.

A later study by Sofonia and Anthony, published in 2008 under the title “High-sediment tolerance in the reef coral *Turbinaria mesenterina* from the inner Great Barrier Reef lagoon,” confirmed that the species tolerates sediment loads that harm many other corals. Its plate shapes also help. Upright and vase-shaped plates shed settling sediment, while the horizontal plates typical of deeper, calmer water maximise the area exposed to dim light. The plasticity of colony form, which makes the species frustrating to identify, is part of how it survives.

Laboratory work on *T. reniformis* points in the same direction. In a 2021 study by Dobson, Ferrier-Pagès and colleagues, corals were grown for 28 days at 25 or 30 °C, under higher or lower light, fed or unfed. In *T. reniformis*, feeding with *Artemia* nauplii offset the extra metabolic demand imposed by high temperature, while lower light reduced the loss of stored lipids. An earlier 2013 experiment by Béraud and colleagues found that *T. reniformis* given a modest supply of dissolved ammonium kept its photosynthetic pigments and maintained calcification during a seven-day rise to 31 °C, whereas corals without the extra nitrogen lost pigments and calcified less. Nutrient status, not only temperature, shapes how this coral handles heat.

How does Turbinaria reproduce and grow?
Colonies grow by budding new polyps and by extending their plates outward, so a colony is a clone that can become very large over decades: individual colonies of several species reach a metre or more. Fragments broken off by storms can reattach and continue growing, and this is the basis of propagation in aquaculture.

Sexually, *T. mesenterina* is gonochoric, meaning each colony is either male or female, and is a broadcast spawner that releases eggs and sperm into the water. Around Australia its spawning season has been reported as four to six months out of step with that of most neighbouring corals, which famously spawn together in a few nights after the late spring full moons. Fertilised eggs develop into planula larvae that drift before settling and founding new colonies. The reproduction of the rarer species is poorly documented.

What eats or threatens Turbinaria?
*Turbinaria* is notably unpopular with the crown-of-thorns starfish (*Acanthaster*), the coral predator responsible for repeated outbreaks across the Indo-Pacific: it is seldom attacked even when other corals around it are being eaten.

Heat stress is a greater threat. In the 2016 marine heatwave that bleached much of the Great Barrier Reef, the high-latitude reefs of eastern Australia also bleached. A 2024 study by Brigitte Sommer and colleagues, tracking coral size structure there from 2010 to 2019, found that larger *Turbinaria* colonies were more likely to bleach than small ones, but that *Turbinaria* populations stayed remarkably stable over the decade despite the bleaching, in contrast to declines in endemic *Pocillopora*. The authors described the genus as showing notable resilience in the subtropics.

Other pressures are local: dredging and runoff that push turbidity beyond even *Turbinaria*’s tolerance, coastal development on the inshore reefs it favours, and collection for the aquarium trade. The EDGE of Existence programme names harvesting for the aquarium trade, mainly in Indonesia, as the main threat to *T. mesenterina*.

Is Turbinaria endangered?
All *Turbinaria* species, like all stony corals, are listed on CITES Appendix II, so international trade requires export permits and monitoring. In the IUCN Red List assessments of 2008, many species were listed as Vulnerable, including *T. reniformis*, *T. mesenterina*, *T. stellulata*, *T. bifrons*, *T. patula* and *T. heronensis*, largely on the basis of projected coral reef decline. A new round of coral assessments dated 2023 has revised some of these: *T. reniformis*, for example, is now listed as Least Concern. Because the statuses are changing, it is worth checking the current Red List entry for any particular species rather than relying on older guides.

Is Turbinaria good for a reef aquarium?
Yes. *Turbinaria*, and especially the yellow scroll coral *T. reniformis*, is widely regarded as one of the hardiest stony corals in the hobby. Its natural tolerance of low and variable light, its ability to feed on fine particles and its peaceful nature make it a good bridge between soft corals and more demanding small-polyp stony corals. Aquacultured fragments are widely available, which reduces pressure on wild colonies; see [coral aquaculture](/coral-aquaculture/).

**Light and placement.** Moderate light suits most specimens. Plates grow toward the light and adjust their angle, so a colony placed low on the rockwork will tend to form a horizontal or cupped plate, while one higher up may grow more upright. Leave room around the colony, because a healthy plate keeps widening for years.

**Flow.** Moderate flow keeps sediment and detritus from settling on the plates. In a tank without enough water movement, dead patches often start in the centre of a cupped colony where debris accumulates.

**Feeding.** The coral gets much of its energy from its zooxanthellae, but the research on its heterotrophy suggests that fine particulate foods, such as rotifers, copepods, newly hatched brine shrimp and suspended reef foods, are useful supplements, especially in tanks with low light or very low nutrients.

**Water chemistry.** As a calcifying stony coral, it needs stable alkalinity, calcium and magnesium, and, like most reef corals, it does better with low but measurable nitrate and phosphate than with nutrient levels pushed to zero. Stability matters more than any single target number. The general reef-keeping ranges in the table below are a starting point, not species-specific requirements.

| Parameter | Common reef-keeping range |
| --------- | ------------------------- |
| Temperature | 24–27 °C (75–80 °F) |
| Salinity | 1.025–1.026 SG (about 35 ppt) |
| Alkalinity | Stable, typically 7–9 dKH |
| Calcium / magnesium | About 400–450 / 1,250–1,350 ppm |
| Nitrate / phosphate | Low but detectable |

**Neighbours.** *Turbinaria* is not aggressive and has short tentacles, but large plates can shade corals beneath them. Keep it away from corals with long sweeper tentacles, such as *Galaxea* or *Euphyllia*, which can sting plate edges.

**Fragging.** Plates can be cut with a coral saw or snapped with bone cutters and the pieces glued to plugs or rock. The dense skeleton makes cutting harder than with branching corals, but fragments heal and resume growth reliably.

How is Turbinaria related to Duncan and sun corals?
All three belong to the Dendrophylliidae, but they show the full range of lifestyles in that family. *Turbinaria* builds sunlit reef plates with the help of zooxanthellae and feeds mainly at night. Its close relative the [Duncan coral](/duncanopsammia/) also hosts zooxanthellae but has large, anemone-like polyps that open by day, as does the plate-forming *Duncanopsammia peltata* that used to be classed as a *Turbinaria*. The [sun corals](/tubastrea/) have abandoned photosynthesis altogether and live under overhangs and in caves, catching plankton at night. The shared willingness to feed on plankton, inherited from that common ancestry, is part of what makes *Turbinaria* so resilient in murky water.

Frequently asked questions
What is Turbinaria coral?

A genus of plate-forming stony corals in the family Dendrophylliidae, known as cup, scroll, vase and pagoda corals. WoRMS accepts 13 living species.

Is Turbinaria peltata still a Turbinaria?

No. WoRMS now lists it as *Duncanopsammia peltata*, a relative of the Duncan coral, though many guides still use the old name.

Is Turbinaria an SPS or LPS coral?

It has small polyps and is usually grouped with SPS, but it is often kept with LPS-level care because it is so hardy.

Is Turbinaria easy to keep?

Yes. It tolerates moderate light and turbid conditions, but it needs stable alkalinity and calcium and room to grow.

What is the difference between Turbinaria and scroll coral?

Scroll coral is one species, *Turbinaria reniformis*, within the genus.

When are Turbinaria polyps open?

Mostly at night. The well-known exception, the former *T. peltata*, is now in *Duncanopsammia*.

Why is it called pagoda coral?

Large colonies grow in stacked, tiered plates that resemble the roofs of a pagoda.

Does Turbinaria need feeding?

It gets much of its energy from zooxanthellae, but studies show it feeds actively on fine particles, so particulate foods help.

Sources & further reading

- World Register of Marine Species: *Turbinaria* Oken, 1815 (Dendrophylliidae), 13 accepted species; *T. peltata* listed as *Duncanopsammia peltata*.
- Arrigoni, R. et al. (2014). A phylogeny reconstruction of the Dendrophylliidae (Cnidaria, Scleractinia). *Zoologica Scripta*. doi:10.1111/zsc.12072
- Anthony, K.R.N. & Fabricius, K.E. (2000). Shifting roles of heterotrophy and autotrophy in coral energetics under varying turbidity. *J. Exp. Mar. Biol. Ecol.* doi:10.1016/S0022-0981(00)00237-9
- Sofonia, J.J. & Anthony, K.R.N. (2008). High-sediment tolerance in the reef coral *Turbinaria mesenterina* from the inner Great Barrier Reef lagoon. *Estuar. Coast. Shelf Sci.* doi:10.1016/j.ecss.2008.02.025
- Dobson, K.L. et al. (2021). The effects of temperature, light, and feeding on the physiology of *Pocillopora damicornis*, *Stylophora pistillata*, and *Turbinaria reniformis*. *Water* 13: 2048.
- Béraud, E. et al. (2013). The response of *Turbinaria reniformis* to thermal stress depends on the nitrogen status of the coral holobiont. *J. Exp. Biol.* doi:10.1242/jeb.085183
- Sommer, B. et al. (2024). Decadal demographic shifts and size-dependent disturbance responses of corals in a subtropical warming hotspot. *Scientific Reports*. doi:10.1038/s41598-024-56890-w
- Johnson, J.A. et al. (2017). Palaeoecological records of coral community development on a turbid, nearshore reef complex. *Coral Reefs*. doi:10.1007/s00338-017-1561-1
- IUCN Red List: *Turbinaria reniformis*, assessments 2008 (Vulnerable) and 2023 (Least Concern). doi:10.2305/IUCN.UK.2024-2.RLTS.T133697A166017946.en
- EDGE of Existence: *Turbinaria mesenterina*; reproduction, depth range and threats.
- Wikipedia species accounts after Veron (2000), *Corals of the World*: *T. reniformis*, *T. mesenterina*, *T. frondens*, *T. stellulata*, *T. heronensis* and others.

Continue reading
More from Small-Polyp Stony Corals

[SPS CoralsSmall-Polyp Stony Corals — hubEvery SPS genus profile on TheSea.Org.

](/small-polyp-stony-corals/)
[SPS CoralsScroll CoralThe yellow scroll in detail.

](/scroll-coral/)
[SPS CoralsPavonaAnother plating coral.

](/pavona/)
[SPS CoralsMerulinaRadiating plates.

](/merulina/)

BP

Last updated November 7, 2026
Written by
Blane Perun
Blane Perun has been exploring Earth’s oceans and marine life for over 25 years. Founder of TheSea.Org in 1999, underwater photographer, coral aquaculture pioneer, and explorer of 80+ countries.

[About Blane Perun →](/about-blane-perun/)
[More on Small-Polyp Stony Corals →](/small-polyp-stony-corals/)