---
title: "AIO Zoanthids or AOI Zoanthids? The Name, the Strain and Its Care"
url: https://thesea.org/aio-zoanthids/
date: 2023-12-04
modified: 2026-11-15
lang: en
author: "Blane Perun"
description: "Searching for AIO zoanthids usually means AOI zoas, a long-running aquacultured strain from World Wide Corals. What the name means, how farm house strains differ from generic morphs, and how to keep and frag them."
categories:
  - "Zoanthids"
image: https://thesea.org/wp-content/uploads/aio-zoanthids-thesea-org-blane-perun-1024x572.webp
word_count: 2593
---

# AIO Zoanthids or AOI Zoanthids? The Name, the Strain and Its Care

[TheSea.Org](/)▸[Coral Reef](/coral-reef-definition/)▸[Zoanthids](/zoanthids/)▸AIO Zoanthids

# AIO Zoanthids — Or AOI? Untangling a Farm Strain’s Name

Zoanthids
By [Blane Perun](/about-blane-perun/)
November 7, 2026
13 min read

Morph card

Usual spellingAOI (often typed AIO)
OriginWorld Wide Corals house strain, Florida
Genus*Zoanthus* (aquarium strain)
SourceAquacultured
LightLow to moderate
FlowModerate
Temperature76–82°F (24–28°C)
DifficultyEasy

“AIO zoanthids” is almost always a typo or reshuffle of AOI zoanthids, a *Zoanthus* strain that World Wide Corals, a coral farm and retailer in Florida, sells as one of its most popular zoas, grown in-house “for many many years”. Other farms now sell AOI frags too. The old idea that AIO stands for “All-In-One” is not supported by any grower we could find.

That makes AOI a good example of a farm house strain: a single colony line propagated by one grower and then spread through the hobby. Here is what that means and how to keep them. For the wider group, see our [zoanthids hub](/zoanthids/).

AIO or AOI: which is right?
Retailers including World Wide Corals, Bulk Reef Supply, TopShelf Aquatics and Whitlyn Aquatics list the strain as AOI. Searches and forum posts often type AIO, which is why both appear. If you are shopping, search for both spellings and buy from a photo of the actual frag.

AOIGrower’s spelling
1Original house line
76–82°FTemperature
3–5Polyps for a good starter frag

![Zoanthids with dark purple discs, green centres and orange tips - AIO zoanthids](https://thesea.org/wp-content/uploads/aio-zoanthids-thesea-org-by-blane-perun.jpg)AIO Zoanthids
What is a house strain?
A house strain is a coral line that a farm has grown from its own mother colony, often for years, and sells under its own name. Compared with a generic name like “Rasta” or “Fruit Loops”, a house strain from the original farm is more consistent, because every frag comes from the same clone. Once frags spread to other sellers, the name can drift again.

| Label type | Example | Consistency |
| ---------- | ------- | ----------- |
| Generic morph name | Rasta, Fruit Loops | Varies a lot between sellers |
| Farm house strain | WWC AOI | Consistent from the original farm |
| Prefixed name | Farm initials + name | Consistent within that farm |
| WYSIWYG | Photo of the actual frag | Exactly what you get |

How do you care for AOI zoanthids?
- Light: low to moderate, acclimated slowly- Flow: moderate and random so detritus does not settle between polyps- Water: salinity 1.025–1.026, pH 8.1–8.4, alkalinity 8–10 dKH- Nutrients: avoid stripping nitrate and phosphate to zero- Feeding: optional small foods once or twice a week
Farm-grown frags are already used to aquarium lighting and water, so they usually settle faster than wild-collected colonies.

“A house strain is only as consistent as its paper trail. Buy from the farm that grew it or from a photo of the frag.”
— Blane Perun, TheSea.Org

Why buy aquacultured zoas?
Aquacultured zoanthids are grown from frags rather than taken from reefs. They tend to arrive cleaner, with fewer hitchhikers such as [zoanthid-eating nudibranchs](/zoanthid-eating-nudibranch/) and [sea spiders](/zoanthid-eating-spiders/), and they reduce collection pressure on wild reefs. Our [coral aquaculture](/coral-aquaculture/) section explains how farms do it.

How should you place AOI zoas in a tank?
Give them a spot on the lower or middle rockwork with moderate, indirect flow, and leave 2–3 inches (5–8 cm) between them and other corals. Zoas have weak stings but grow sideways over bare rock, and they can be stung by corals with long sweeper tentacles such as some LPS. Many keepers build a dedicated zoa garden on one rock so colonies can spread and touch without harming slower corals. Our [zoanthid garden guide](/zoanthid-garden/) shows how.

How can you tell if AOI zoas are healthy?
- Open polyps: most polyps open fully during the light period- Full stalks: polyps stand up on firm columns rather than shrinking flat- Clean mat: no film, slime or hair algae between polyps- Steady growth: new buds appear every few weeks- Normal colour: no sudden bleaching to white or browning
Warning signs include polyps that stay shut for days, stretched-out stalks reaching for light, or polyps melting into the base. Check salinity, temperature and alkalinity first, then look for pests at night with a torch, when sea spiders and nudibranchs are easier to spot.

Should you feed AOI zoanthids?
They do not need it. Zooxanthellae in the tissue provide most of their energy. If you want faster growth, broadcast a small amount of fine coral food or rotifers once or twice a week with the pumps on low, then return to normal flow. Heavy feeding mostly feeds algae.

What tools do you need to frag AOI zoas?
Fragging zoanthids is simple once you have the right equipment ready before you start. You will need a sharp cutting tool: a new scalpel or craft blade for cutting through soft tissue, and bone cutters or a small pair of side cutters if you have to split rock or rubble. You will also need frag plugs or discs, a cyanoacrylate gel glue (the thick gel version of superglue, which sets quickly in water), and two or three containers of tank water at tank temperature. Paper towels, a turkey baster and a small brush complete the kit. Above all, you need protective gear: nitrile or similar gloves and safety glasses or goggles, worn from the moment you start handling the colony.

Set everything up on a stable surface near the tank, with the containers filled from the display so that the frags go back into water of the same temperature and chemistry. Keep a separate container for rinsing tools, and prepare a fresh 0.1% bleach solution, roughly one part household bleach to ten parts water as advised by the CDC for zoanthid equipment, to soak tools in afterwards. A tidy setup makes the process faster, and speed matters, because the less time polyps spend out of the tank, the faster they recover.

Where on the colony should you cut?
Choose a healthy, fully open colony that has been growing well for some time. Cutting a stressed colony only adds to its problems. Plan to take polyps from the edge of the colony, where new buds are forming and the polyps are least crowded. Edge polyps are often attached to the rock by a thin layer of coenenchyme, which makes them easy to lift off. Cutting from the centre leaves a gap that takes longer to fill and can let algae settle in the middle of the colony.

Decide in advance how many polyps you will take. For a frag that will establish quickly, three to five polyps joined by their connecting tissue is ideal. Single polyps can be fragged and will usually survive, but they take longer to start budding. Never take more than a small fraction of the colony in one session, so that the mother colony stays strong and regrows quickly.

How do you cut zoanthids under water?
The safest and gentlest way to frag zoanthids is to keep everything under water. Place the rock or plug carrying the colony in a container of tank water, hold it steady with a gloved hand, and slide the blade under the polyps you want to remove, cutting through the coenenchyme where it meets the rock. Work slowly and keep the blade low so that you lift the polyps cleanly with a little of the base tissue, rather than slicing through the stalks. If the colony sits on rubble or a small rock, it may be easier to break off a piece of rock with the polyps attached using bone cutters.

Cutting under water reduces the risk of zoanthid fluid spraying into the air or into your eyes, which is the main way hobbyists have been poisoned by palytoxin. It also keeps the polyps wet and reduces stress. Zoanthids often close tightly when touched, which makes cutting easier, so do not be concerned if the colony shuts down during the process.

How do you glue a zoa frag to a plug?
Lift the cut polyps out of the water and lay them on a damp paper towel. Gently pat the base dry, because glue bonds poorly to wet tissue. Put a small blob of gel glue on a dry frag plug, press the base of the polyps into it, and hold them for a few seconds while the glue begins to set. Return the frag to the container of tank water immediately; the glue will finish curing under water. Some hobbyists prefer to apply the glue to the plug under water, which also works with good gel glues and reduces the time the polyps spend in air.

Use as little glue as you can. Excess glue can cover tissue and kill it, and the white film that some glues leave as they cure is unsightly. Polyps glued to a plug often take a few days to attach themselves properly, and during that time they may lift off if they are knocked. Keeping new frags in a quiet spot with gentle flow, or on a frag rack where they will not be disturbed, gives them the best start.

Are there other ways to mount zoa frags?
Glue is the most common method, but there are alternatives. Small pieces of rubble can be attached to plugs with epoxy putty, which is useful when you have broken off a piece of rock with the polyps still attached. Some hobbyists use rubber bands or fine mesh to hold polyps against a plug until they attach naturally, avoiding glue entirely. This is slower but useful for delicate polyps. A few keepers simply place loose polyps in a small dish of rubble in a low-flow area and let them attach on their own, which zoanthids are surprisingly good at doing.

How do you care for new frags after cutting?
Place new frags in moderate light and gentle flow, either in the display or in a separate frag tank. Avoid strong direct light for the first week or two, because the cut polyps need to recover and may be more sensitive than usual. Check the frags daily. Polyps that stay closed for a few days and then open are recovering normally. Polyps that remain closed for a week or more, or that look slimy or begin to disintegrate, may be infected and should be removed so that they do not affect the others.

The mother colony needs care too. After fragging, look over the cut areas and remove any loose tissue or debris with a turkey baster. Keep the colony in its usual position and avoid cutting it again for several weeks. Most healthy zoanthid colonies regrow quickly, and the cut edges are often covered with new buds within a month or two.

How do frag swaps and club trades work?
Many hobbyists frag their zoas not for sale but to share. Reef clubs and online communities hold frag swaps where members trade or sell frags from their own tanks, and these events are one of the best places to find long-farmed strains such as AOI at reasonable prices. Bringing frags to a swap is also a good way to manage a colony that is outgrowing its space. Frags from home tanks are usually well adapted to aquarium conditions and come with a known history, which makes them a good buy.

When you sell or trade frags, take the same care you would expect from a seller. Dip and inspect every frag before it leaves your tank, label it with the morph name and your name, and include a note of the light and conditions it came from. Bag each frag in clean tank water with plenty of air, and keep the bags warm in cool weather. A reputation for clean, healthy, accurately labelled frags is worth more to a hobbyist than any single sale.

How do you keep a strain true over years of fragging?
Once a colony has been fragged a few times, it becomes easy to lose track of which plug holds which strain, especially in a tank with many similar zoas. Label every frag plug, keep a written or photographic record of each colony, and keep strains of similar appearance well apart in the tank so that their edges do not merge. If two colonies do grow together, it can become impossible to tell which polyps belong to which. Careful records are what let a hobbyist pass on an AOI frag years from now and be confident that it is the same strain that was first bought.

What do you do with leftover rock and tools after fragging?
Fragging leaves behind cut tissue, loose polyps and sometimes pieces of rock or rubble covered in zoanthid tissue. Never boil, steam, scrub dry or pressure-wash this material, and never heat it in an oven or burn it, because heat and spray can release palytoxin into the air. Reported cases of palytoxin poisoning among aquarium keepers have often followed exactly these activities. Instead, leftover rock can be returned to the tank if it is clean, or soaked in a fresh 0.1% bleach solution for at least half an hour before disposal or reuse, following the CDC’s advice for decontaminating zoanthid equipment.

Rinse blades, cutters and containers in the same solution, then rinse them well in fresh water and let them dry. Throw away disposable items such as paper towels and gloves in a sealed bag. Wash your hands thoroughly afterwards, even though you wore gloves, and avoid touching your face or eyes while you work. Finally, check the water in the containers you used: it may contain mucus and fluid from the cut polyps, so pour it away down a drain rather than back into the tank. If anyone in the household develops a cough, fever, eye irritation or a metallic taste after a fragging session, seek medical advice and mention the coral exposure. These steps take only a few minutes and remove most of the risk from what is otherwise one of the most enjoyable parts of keeping zoanthids.

How do you frag them?
Under water, cut a small cluster of polyps from the edge with a sharp blade, glue it to a plug, and keep it in moderate light and flow. A healthy frag of three to five polyps is a good start.

!
Wear gloves and eye protection whenever you cut zoanthids, keep cuts under water, and never boil, scrub or pressure-wash zoanthid rock.

Frequently asked questions
What are AIO zoanthids?

Usually AOI zoanthids, a long-farmed Zoanthus strain from World Wide Corals.

Does AIO mean All-In-One?

We found no grower who uses that meaning; sellers list the strain as AOI.

Are AOI zoas aquacultured?

Yes. The strain has been farm-grown for many years.

Are AOI zoanthids easy to keep?

Yes. They are hardy under low to moderate light and moderate flow.

What is a house strain coral?

A coral line grown by one farm from its own mother colony and sold under its own name.

Do AOI zoas need feeding?

No, but small foods once or twice a week can speed growth.

Are AOI zoanthids toxic?

Zoanthids can carry toxins. Wear gloves and eye protection.

Why are my AOI zoas closed?

Check salinity, temperature and alkalinity, then look for pests at night with a torch.

More zoanthid morphs

Named aquarium morphs

[Zoanthids hub](/zoanthids/)
[Fruit Loops](/fruit-loop-zoanthids/)
[Orange](/orange-zoanthids/)
[Fire & Ice](/fire-and-ice-zoanthids/)
[Eagle Eye](/eagle-eye-zoanthids/)
[Green](/green-zoanthids/)

Sources & further reading

- World Wide Corals: WWC AOI Zoanthids.
- Bulk Reef Supply: WWC AOI Zoanthids.
- TopShelf Aquatics: AOI Zoanthids coral care guide.
- Whitlyn Aquatics: AOI Zoanthid (Aquacultured).

Continue reading
Related reading

[Coral AquacultureCoral AquacultureHow farms grow corals.

](/coral-aquaculture/)
[ZoanthidsRasta ZoanthidsA generic morph name.

](/rasta-zoanthids/)
[ZoanthidsZoanthid CareFull husbandry.

](/zoanthid-care/)
[ZoanthidsZoanthid IdentificationZoa or paly?

](/zoanthid-identification/)
[ZoanthidsZoanthids HubEvery zoanthid on TheSea.Org.

](/zoanthids/)
[ZoanthidsFruit Loop ZoanthidsAnother popular morph.

](/fruit-loop-zoanthids/)

BP

Last updated November 7, 2026
Written by
Blane Perun
Blane Perun has been exploring Earth’s oceans and marine life for over 25 years. Founder of TheSea.Org in 1999, underwater photographer, coral aquaculture pioneer, and explorer of 80+ countries.

[About Blane Perun →](/about-blane-perun/)